Reverend Sensei 290 Tobacco Sunburst Set-Neck Excellent, $595.00

Reverend Sensei with low play hours and only the very lightest of wear. Biggest "bump" is on tip of the cutaway on the back of the guitar. No issues and just set up by our in-house luthier. Since this model is still in production we'll let the fine folks at Reverend give you the lay of the land:

"Our take on what a classic double-cutaway should be. Full thickness body, and the correct amount of wood where the neck meets the body. All the rawness, midrange presence, and upper-fret access you’d expect, but more versatility, a stable neck joint, and better balance!"

PICKUPS - 9A5 Bridge, 9A5 Neck
BRIDGE - Tune-O-Matic with Stop Tail
NECK - Three-Piece Korina
SCALE - 24 3/4"
NECK PROFILE - Medium Oval
FINGERBOARD - Blackwood Tek - 12" Radius
FRETS - 22 Medium Jumbo
TRUSS ROD - Dual Action - Headstock Access
TUNERS - Reverend Pin-Lock
NUT - 43mm Width - Boneite
CONTROLS - Volume, Tone, Bass Contour, 3-way

CUSTOM PICKUPS

We design our own proprietary custom pickups, to achieve the best tonal match with our instruments. Reverend pickups are also specifically designed for each position, for balanced volume and tone when switching. 

BASS CONTOUR

This passive bass roll-off is great for tightening up the low end, or re-voicing the pickups. It can make a humbucker sound like a single-coil, or give a P-90 that classic twang. Variable pickup voicing at your fingertips!

INITIALED HEADSTOCK

Every Reverend is hand initialed on the back of the headstock by Zack Green, our highly skilled technician who sets up, inspects, and tests every instrument.

TREBLE BLEED CIRCUIT

All Reverend guitars have a treble bleed circuit, preserving the treble when you roll back the volume control. When you roll back a standard volume control, the tone loses treble and becomes dull sounding. Now you can turn down and still sound great!

PIN-LOCK TUNERS

A thumbwheel under the tuner pushes a steel pin up through the post, locking the string in place for exceptional tuning stability and super-fast string changes.

DUAL-ACTION TRUSS ROD

Our dual action rod adjusts in both directions, allowing back bow or forward bow. This assures correct adjustment range is possible regardless of string tension, extreme climate conditions, or the effects of long term aging. It’s also located at the headstock for easy access.